AUTHCONFIG

Section: Maintenance Commands (8)
Updated: 22 July 2011
Index Return to Main Contents
 

NAME

authconfig, authconfig-tui - an interface for configuring system authentication resources  

SYNOPSIS

authconfig [options] {--update|--updateall|--test|--probe|--restorebackup <name>|--savebackup <name>|--restorelastbackup}  

DESCRIPTION

authconfig provides a simple method of configuring /etc/sysconfig/network to handle NIS, as well as /etc/passwd and /etc/shadow, the files used for shadow password support. Basic LDAP, Kerberos 5, and Winbind client configuration is also provided.

If --test action is specified, authconfig can be run by users other then root, and any configuration changes are not saved but printed instead. If --update action is specified, authconfig must be run by root (or through console helper), and configuration changes are saved. Only the files affected by the configuration changes are overwritten. If --updateall action is specified, authconfig must be run by root (or through console helper), and all configuration files are written. The --probe action instructs authconfig to use DNS and other means to guess at configuration information for the current host, print its guesses if it finds them to standard output, and exit.

The --restorebackup, --savebackup, and --restorelastbackup actions provide a possibility to save and later restore a backup of configuration files which authconfig modifies. Authconfig also saves an automatic backup of configuration files before every configuration change. This special backup can be restored by the --restorelastbackup action.

If --nostart is specified (which is what the install program does), ypbind or other daemons will not be started or stopped immediately following program execution, but only enabled to start or stop at boot time.

The --enablenis, --enableldap, --enablewinbind, and --enablehesiod options are used to configure user information services in /etc/nsswitch.conf, the --enablecache option is used to configure naming services caching, and the --enableshadow, --enableldapauth, --enablekrb5, and --enablewinbindauth options are used to configure authentication functions via /etc/pam.d/system-auth. Each --enable has a matching --disable option that disables the service if it is already enabled. The respective services have parameters which configure their server names etc.

The algorithm used for storing new password hashes can be specified by the --passalgo option which takes one of the following possible values as a parameter: descrypt, bigcrypt, md5, sha256, and sha512.

The --enablelocauthorize option allows to bypass checking network authentication services for authorization and the --enablesysnetauth allows authentication of system accounts (with uid < 500) by these services.

When the configuration settings allow use of SSSD for user information services and authentication, SSSD will be automatically used instead of the legacy services and the SSSD configuration will be set up so there is a default domain populated with the settings required to connect the services. The --enablesssd and --enablesssdauth options force adding SSSD to /etc/nsswitch.conf and /etc/pam.d/system-auth, but they do not set up the domain in the SSSD configuration files. The SSSD configuration has to be set up manually. The allowed configuration of services for SSSD are: LDAP for user information (--enableldap) and either LDAP (--enableldapauth), or Kerberos (--enablekrb5) for authentication.

In case SSSD does not support some feature of the legacy services that are required for the site configuration, the use of the legacy services can be forced by setting FORCELEGACY=yes in /etc/sysconfig/authconfig.

The list of options mentioned here in the manual page is not exhaustive, please refer to authconfig --help for the complete list of the options.

The authconfig-tui supports all options of authconfig but it implies --update as the default action. Its window contains a Cancel button by default. If --back option is specified at run time, a Back button is presented instead. If --kickstart is specified, no interactive screens will be seen. The values the program will use will be those specified by the other options (--passalgo, --enableshadow, etc.).

For namelist you may substitute either a single name or a comma-separated list of names.  

NOTES

The authconfig-tui is deprecated. No new configuration settings will be supported by its text user interface. Use system-config-authentication GUI application or the command line options instead.

 

RETURN CODES

authconfig returns 0 on success, 2 on error.

authconfig-tui returns 0 on success, 2 on error, and 1 if the user cancelled the program (by using either the Cancel or Back button).

 

FILES

/etc/sysconfig/authconfig
Used to track whether or not particular authentication mechanisms are enabled. Currently includes variables named USESHADOW, USEMD5, USEKERBEROS, USELDAPAUTH, USESMBAUTH, USEWINBIND, USEWINBINDAUTH, USEHESIOD, USENIS, USELDAP, and others.
/etc/passwd
/etc/shadow
Used for shadow password support.
/etc/yp.conf
Configuration file for NIS support.
/etc/sysconfig/network
Another configuration file for NIS support.
/etc/ldap.conf
/etc/nss_ldap.conf
/etc/pam_ldap.conf
/etc/nslcd.conf
/etc/openldap/ldap.conf
Used to configure nss_ldap, pam_ldap, nslcd, and the OpenLDAP library. Only the files already existing on the system are modified.
/etc/krb5.conf
Used to configure Kerberos 5.
/etc/hesiod.conf
Used to configure Hesiod.
/etc/samba/smb.conf
Used to configure winbind authentication.
/etc/nsswitch.conf
Used to configure user information services.
/etc/login.defs
Used to configure parameters of user accounts (minimum UID of a regular user, password hashing algorithm).
/etc/pam.d/system-auth
Common PAM configuration for system services which include it using the include directive. It is created as symlink and not relinked if it points to another file.
/etc/pam.d/system-auth-ac
Contains the actual PAM configuration for system services and is the default target of the /etc/pam.d/system-auth symlink. If a local configuration of PAM is created (and symlinked from system-auth file) this file can be included there.

 

SEE ALSO

authconfig-gtk(8), system-auth-ac(5), passwd(5), shadow(5), pwconv(1), domainname(1), ypbind(8), nsswitch.conf(5), smb.conf(5), sssd(8)

 

AUTHORS

Nalin Dahyabhai <[email protected]>, Preston Brown <[email protected]>,
Matt Wilson <[email protected]>, Tomas Mraz <[email protected]>


 

Index

NAME
SYNOPSIS
DESCRIPTION
NOTES
RETURN CODES
FILES
SEE ALSO
AUTHORS

This document was created by man2html, using the manual pages.
Time: 05:34:24 GMT, December 24, 2015